 This is the Tekin RX8 and Redline T8 1/8th Scale Buggy Competition
Brushless ESC/Motor Combo (1700kV). Tekin’s RX8 is big power in a small
package. Based off of the proven RS series Speed Control the RX8 takes
large scale current demands in stride. Leading the industry not only in
power handling ability but size and features with Drag Brake, Neutral
width, Throttle Profiles, Voltage Cut Offs for Lipos and much more. The
RX8 sits at only 1.5 x 2.22 x 1.46, a small foot print making it easy
to install on any chassis. Don’t negotiate the track, attack it with
extreme prejudice.
Tekin’s
Redline T8 motor series is designed for large scale, high performance
competition. Featuring sensors for flawless, reliable on track
operation, the T8 provides pro level control and power. Capable of both
sensored and sensorless operation, the T8 series motors are the leading
edge of large scale RC motor technology. Utilize the torque and speed
of your T8 to propel you across the finish line.
Couple the
Redline T8 with Tekin’s RX8 Electronic Speed Control and harness the
industry's leading technologies in a complete Tekin power system
solution.
RX8 Features
- Easily Access Programming, Anywhere, Anytime
- Drives Sensor/Sensorless Brushless and Brushed Motors
- D2: Dual Drive Mode Technology
- On-Board Temperature Indicator
- PC Interface for Custom Programming
- HDAC: High Density Copper Fet Boards
- Sensor Plug for Precise Commutation with all Motors
- Solder Posts for Easy Wire Replacement
- Self Test Diagnostics and Factory Reset
- Adjustable Drag Brakes
- RS-232 Digital Communications Protocol
- Pit Tune Mode
- DGF2: Digital Glitch Filtering V2
- QuickTune™ Programming
- One-Touch Radio Calibration
Programming Features
- Brake / Reverse Strength (13 steps)
- Current Limiter (none + 12 steps)
- Neutral Width (7 steps)
- Throttle Profiles (7 choices)
- Motor/Reverse Type: Brushless, Brushed, No Rev, Rev Delay
- Voltage Cutoffs (none, 2s, 3s, 4s, 6s, Custom)
- Timing Advance when used with Tekin Hotwire
- Extensive Tuning via Tekin HotWire PC Interface (sold separately)
Redline T8 Features
- CNC Machined 6061 T6 Billet aluminum Ribbed Heatsink Can
- Sensored and Sensorless operation.
- High Current Solder Tabs
- Rebuildable Design
- Neodymium Sintered Magnet
- Precision Engineered for Maximum Energy Conversion
- Dual-Plug Sensor Wire Harness
RX8 Specifications
Controls: Forward/Brake/Reverse
Input Voltage: up to 6S Lipo
Continuous Current: 210 Amps*
BEC: 6.0V/5.0A
Motor Limit Brushless Mode: No Limit
Motor Limit Brushed Fwd Only Mode: No Limit
Motor Limit Brushed Fwd/Rev Mode: No Limit
Throttle Profiles: 7 choices (on board)
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 1.5 x 2.2 x 1.4"
Weight Approx: 2.7oz
T8 Specifications:
KV Rating: 1700
Weight: 11.5oz (341g)
Shaft Dimensions: 19 x 5mm w/flat
Motor Diameter: 1.57” (40mm) / 1.65” (42mm) including fin
Motor Length: 2.80” (71mm) |
