 This is the ProTek R/C "Supreme Power" 3S 1100mAh, 20C Lithium Polymer short length battery pack. This battery pack is shorter than the regular PTK-LP-1100-3S20 and is a perfect fit for the Parrot AR.Drone Quadricopter Flying Video Game! This battery has 10% more capacity than the stock battery that comes with the AR.Drone for longer flight times and has a 20C discharge rate for better performance (the stock batter is only 10C). On top of that, this battery weighs less than the stock battery for the AR.Drone, further improving the performance of the Quadricopter.
This pack has a Reverse Polarity Mini Tamiya connector installed to plug right into the AR.Drone, and comes with a 4-pin Align/E-Flite style balance connector that also works with the stock AR.Drone battery charger.
Unlike most other Lithium Polymer batteries, these batteries can be charged at up to 2 times the rated current, or 2C! If your charger is capable, you can charge these batteries at up 2.2A for faster charge times!
CRASH Protection Guarantee!
ProTek RC offers a 50% Damage Replacement program for one (1) year after original purchase date on all batteries that have been damaged due to impact, over-discharging, or improper charging that have not been modified or disassembled. The damaged battery will be replaced by a comparable battery at 50% off of its retail cost.
Click Here To Download Product Manual
Specifications:
- Type: Lithium Polymer
- Capacity: 1100 mAh
- Voltage: 11.1V nominal
- Connector Type: Mini Tamiya
- Balancer Type: Align/E-Flite compatible (XH)
- Number of Cells: 3
- Weight: 89g
- Configuration: 3S
- Dimensions (WxLxH): 34.86 x 69.46 x 19.55mm
- Maximum Charge Rate: 2C (2.2A)!
- Maximum Continuous Discharge: 20C (44A)
NOTE: The AR.Drone uses a proprietary 'Mini Tamiya' style connector, with reverse polarity (+ and - wires reversed). If you intend to use this battery for an application other than an AR.Drone, you will need to reverse the polarity of the plug, or install a different battery connector.
IMPORTANT:
1) DO NOT leave the battery in your model when charging
2) DO NOT leave unattended when charging
3) ALWAYS balance charge the battery
4) ALWAYS use a LiPo charging bag
5) YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)
6) YOU MUST not over discharge the Li-Poly battery pack
7) READ & UNDERSTAND the instructions carefully before operating this battery
NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell) Do not use the battery that has too low a voltage.
Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.
Click Here For Warranty Information
ProTek R/C is an A Main Hobbies brand.
|
