The SSD Locking Hub Installation Tool was developed for SSD Scale Locking Hubs (SSD00007, SSD00011, SSD00014). It is CNC machined with a 7mm hex head that is compatible with any 7mm nut driver.
This product was added to our catalog on May 5, 2016
I’m giving this 5 stars because the design of the hubs in conjunction with this tool make it possible to have some cool scale looking hubs on your wheels. That being said, you have to be very careful and have a steady level hand when using this. It is very easy to slip and it’s hard to get the hub real tight. A little blue loctite will keep the hub from coming loose. I have broken a tooth off of this tool and will be ordering another one next time I need something. People complaining about this just don’t have the patience to work with it. If you are careful and realize how easily you can damage the tool and hub when using this then you can appreciate it and use it properly. If you think it’s going to be easy then don’t buy the hubs or tool. Simple as that.
Paul Smith
Verified Owner
Thursday, Jun 24 2021 (about 2 years ago)
SSD RC Locking Hub Installation Tool
Works great. You will need this to properly tighten locking hubs and rear hubs down.
Will
Verified Owner
Tuesday, Mar 23 2021 (about 3 years ago)
SSD RC Locking Hub Installation Tool
The tool slipped once and multiple "studs" of the tool bent and were beyond repair. I had only used it for a month or so. I have since switched back to normal nuts.
Alfredo Montero
Verified Owner
Wednesday, Nov 20 2019 (about 4 years ago)
SSD RC Locking Hub Installation Tool
works as intended needed for all ssd scale hubs. just remember that u need a 7mm nut driver for it to work correctly.
LB
Verified Owner
Saturday, Nov 9 2019 (about 4 years ago)
SSD RC Locking Hub Installation Tool
This is the locking hub tool you will need to tighten down your SSD locking hubs without messing up the finish.
in the USA and makes prepping your new tires a simple process. Designed to fit into any standard 1/4" quick change drill and 12mm hex 1/10 wheels, the tool simply chucks into ...
Arrma Metal Multi-Tool. This optional multi-tool features a 5mm, ...
5mm, 7mm and 12mm nut. The 12mm nut is offset and allows for easy slipper adjustment on Arrma 4x4 models. This tool also features protrusions to engage with the shock housings on 11mm ...
tool developed for the installation and removal of the pinion gears from the clutch bell on the Mugen MRX and MGT7 series cars. Precision machined and lightweight, this tool is a must ...
This is a Crankshaft Clamp (Locking Tool) from ...
O.S. Engines. This will work with any .32, .46 and .50 size engine. This device facilitates the installation, or removal, of a flywheel, cooling fan or pilot shaft by temporaily locking the ...
Thompson Metal Series 1/10 Wheel Center Caps. These Metal Series Center Caps are officially licensed by Mickey Thompson and add an additional touch of scale realism to your build. Features: CNC Machined ...